Material and preparation
Tell us which seed, crude oil or finished product you will process, and how it will enter this stage.
Continuous mechanical pressing for a planned oilseed workshop.
Confirm the equipment configuration, raw material and destination requirements with our team before ordering.
A screw press moves prepared oilseed through a compression chamber to separate oil from the remaining cake. Start by matching the press to your material and working schedule, then connect preparation, oil collection and filtration.
Ask for a trial using a representative seed sample. Record incoming condition, preparation, working time, oil temperature and the basis used to measure input and output. Results from a different seed or a different preparation method should not be treated as a guaranteed result for your project.
Send your raw material or oil type, required input per working day, planned operating hours, destination country and available power supply. Include photographs of existing equipment and explain the product you intend to sell.
Discuss this equipment · Compare processing equipment · Plan a modular setup
Equipment photographs are external design references for this initial catalogue. The available manufacturer, model, configuration and performance require confirmation in a project quotation.
The press is a central stage between material preparation and oil clarification. It should be selected with representative material, a defined working schedule and a measurable input or output basis.
What test conditions support the stated performance?
Ask for the material, preparation, operating time and measurement basis. A number without these assumptions cannot be compared reliably.
What is included beyond the main machine?
Confirm feed and discharge equipment, controls, installation materials, commissioning, training and spare parts.
What information is still missing?
Do not treat a catalogue photograph or reference layout as a confirmed design for your site.
| Specification | Information to confirm | Why it matters |
|---|---|---|
| Equipment type | Screw Oil Press Machine | |
| Process stage | Press | |
| Purchase scope | Single equipment unit or a coordinated modular setup | |
| Capacity basis | Confirm input material, preparation and operating hours in the quotation | |
| Electrical configuration | Confirm destination voltage, frequency and phase | |
| Reference status | External equipment design; supplied model to be confirmed | |
| Required project inputs | Material, volume, schedule, utilities and finished-product target | |
| Configuration to confirm | Model, included scope, utilities and performance basis |
Use these points to prepare a clear equipment enquiry and compare suitable configurations.
Tell us which seed, crude oil or finished product you will process, and how it will enter this stage.
Share your daily input, working hours and intended output so the equipment scope can be discussed.
Confirm your local power supply, available workspace and the equipment connected before and after this stage.
Discuss installation guidance, operator training, maintenance requirements and spare parts when requesting a quotation.
These guides introduce the wider production process. Confirm the suitability of this product for your material with our team.

Plan peanut oil equipment from the incoming material and the oil product you intend to sell. Start with a practical single-machine scope or connect the required stages as a modular workshop.
Explore the solution ↗
Plan soybean oil equipment from the incoming material and the oil product you intend to sell. Start with a practical single-machine scope or connect the required stages as a modular workshop.
Explore the solution ↗
Plan sunflower oil equipment from the incoming material and the oil product you intend to sell. Start with a practical single-machine scope or connect the required stages as a modular workshop.
Explore the solution ↗Suitability depends on the exact model and the raw material's variety, moisture and preparation. Share your oilseed with us so the applicable model can be confirmed by the supplier.
Use the same feed material, preparation, input units and working schedule. Request a representative demonstration and retain the test assumptions rather than transferring results from an unrelated material or model.
Start with your target raw material input per day and planned operating hours. Ask for rated input per hour together with the test material and operating conditions used to establish that figure.
Preparation requirements vary by oilseed and incoming material condition. Cleaning, shelling, crushing, roasting or conditioning may be relevant; the route should be checked for your specific material.
The press produces crude oil and oil cake. Filtration is commonly considered after pressing. Further refining and filling depend on the finished product specification and your market.
Voltage, frequency, phase, motor configuration and starting requirements must be confirmed before ordering. Provide your destination country and available electrical supply.
Equipment can be discussed as a connected process, from preparation and pressing through filtration, optional refining, storage and filling. The final scope depends on your raw material, target input and finished product.
Include raw material, target daily input, destination country, power supply, finished oil goal, available space and any existing equipment. Photos or videos of your raw material and site can also help the initial discussion.

Compare a compact screw-press configuration for a first workshop.
View equipment ↗
Evaluate a continuous expeller as the central stage of a growing workshop.
View equipment ↗
A batch pressing arrangement to discuss for sesame and specialty-oil projects.
View equipment ↗